Sartorius Factory Series Operating Instructions Manual page 55

Practical Example:
Configure an Individual Printout for Counting Application to Include Dotted Line, Date/Time, Piece Count and Net Weight
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Counting
Exit the Setup menu: press the oo soft key
Then call Setup again and select: Printout: Application-defined output: Configured printout
Step
1. Select Setup menu,
"Printout"
2. Confirm "Application-defined
output"
3. Select and confirm
"Configured printout"
4. Confirm "Indiv. printout"
5. Select "Dotted line"
6. Select "Date/time"
7. Select "Piece count"
8. Select "Net weight"
9. Exit "Printout configuration"
10. Perform weighing operations,
then print
Press key(s)
(or follow instructions)
M, then
q repeatedly and
O soft key
O soft key
q soft key 3 x
O soft key
O soft key
O, q, l soft keys
q soft key twice,
then l soft key
q repeatedly,
then l soft key
Q soft key repeatedly,
then l soft key
oo soft kex
p
Configuring the Scale: FCA
Display/Output
--------------------
14.01.2000 09:19
Qnt + 598 pcs
N + 2003.13 g
55