Sartorius Factory Series Operating Instructions Manual page 81

Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
alphanumeric input),
– printing (NUM print; S ID),
you can also access the following
functions from this application:
Practical Example
Toggle the Display From Grams [g] (1st Unit) to Pounds [lb] (2nd Unit)
Settings (changes in the factory settings required for this example):
Setup: App: Application 1: Toggle wt. units: Weight unit 2: Pounds/lb
Step
1. Delete previous setting if necessary
(U1: Weight unit 1)
2. Change weight unit
to Pounds [lb]
(U2: Weight unit 2)
3. Change weight unit
to Grams [g]
Calibration/Adjustment
§ Press the soft key
isoTST
> See "Calibration/Adjustment"
for further instructions
Toggling to the Next Application
§ Press D
> See the section on the
corresponding application
program for further instructions
Setup (setting parameters)
§ Press M
> See "Configuring the Scale" for
further instructions
Key (or instruction)
c
soft key
lb
g soft key
Operating the Scale: FC
Turning Off the Scale
§ Press e
> The scale shuts off
> The display goes blank
Display/Output
81