Calculation - Sartorius Factory Series Operating Instructions Manual

Calculation

D
Purpose
With this application program you
can calculate a weight value using
an algebraic equation. This can
be used, for example, to determine
the gsm weight (grams per square
meter) of paper.
You can use this application program
in combination with a program
chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application 3
(totalizing, formulation, statistics).
98
Available Features
– You can store an equation and
configure the Setup menu to
initialize this program
automatically with the stored
equation (Setup: ... Auto-start
application when power goes on:
On)
– The symbol is displayed to
o
indicate a calculated value.
The equation used is displayed
in the text line
– If no equation was entered, the
weight value is displayed
– Toggle between the weight
readout, equation input and
display of the calculated result
by pressing the or
Start
soft key (or press c to toggle
between weight and calculated
value)
– The are four operators
(+, –, *, /) and one factor
(weight value) available
when you enter an equation
– Max. equation length:
28 characters
– Pressing c will delete either
the equation or the last character
entered, depending on the
configuration in the Setup menu
(Setup: ... Keyboard: CF function
for input: Delete last character;
see also "Configuring the Scale")
– The calculated result is displayed
with the number of decimal places
configured in the Setup menu.
Not all decimal places are
displayed if the result is longer
than the display allows.
If there are more digits before
the decimal point than the
display can show, an error
message is displayed.
– The equation is stored in
non-volatile memory
Factory Settings
Decimal places in calculated result:
2 decimal places
Soft Key Functions
Toggle to equation
Equat.
Enter an addition operator
+
in the equation
Enter a subtraction
-
operator in the equation
Enter a multiplication
*
operator in the equation
Enter a division operator
/
in the equation
Start calculation
Start
Weigh
Toggle to the weighing
Weigh.
mode
Enter a weight operand
Weight
in the equation
Printout for Calculation
The calculation result is printed.
Res +
Res: Result of calculation with
equation
693.88 o