6.7
Menu Settings
6.7.1
Accessing the SETUP Menu
Accessing the SETUP menu and settings is described in the following using "Adapting
the scale to ambient conditions" as an example (SETUP -> SCALE -> AMBIEN.):
Press the ! key for approx. two seconds.
t
Level 1 of the SETUP menu is displayed.
y
Select the SETUP menu item of the first level using the O / P keys.
t
Press the ! key.
t
Level 2 of the SETUP menu is displayed.
y
Select the SCALE menu item of the second level using the O / P keys.
t
Press the ! key.
t
Level 3 of the SETUP menu is displayed.
y
Select the AMBIEN. menu item of the third level using the O / P keys.
t
Press the ! key.
t
Level 4 of the SETUP menu is displayed.
y
Select the desired setting using the O / P keys.
t
Press the ! key.
t
The setting is applied; "o" appears on the display.
y
(This concludes the example.)
Press the § key several times to exit the menu.
t
A detailed list of possible settings can be found in Chapter "3.4 Menu List,"
page 12.
6.7.2
Configuring the Main Menu Settings
6.7.2.1 Accessing the Setup Menu
Press and hold the ! key for approx. 2 sec.
t
SETUP (level 1) appears on the display.
y
Operation
EVO1Y | LAB1Y Operating Instructions
27