Sartorius Factory Series Operating Instructions Manual page 70

Preparation: FC Models
Set the parameters for calibration and adjustment; e.g., with automatic calibration/adjustment, isoCAL on
Step
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1. Switch on the scale
2. Select the Setup menu
3. Select the Scale menu
4. Confirm selection
of Scale functions
5. Select CAL/isoTST key function
and confirm
6. Select desired function
and confirm (e.g., item 12)
7. Exit CAL/isoTST key function
70
Key (or instruction)
e
M
Menu soft key
soft key
O
soft key repeatedly
q
soft key
O
soft key, repeatedly,
q
if necessary
soft key
l
soft key
o
Display/Output
Sartorius logo
Self test
o = last setting selected