Sartorius Factory Series Operating Instructions Manual page 127

Practical Example
Weighing in Components
Settings (changes in the factory settings required for this example):
Setup: App(lication parameters): Application 3: Formulation: Automatic storage: On, first value at stability
Setup: App(lication parameters): Application 3: Formulation: Minimum load for automatic storage: 100 digits
Setup: App(lication parameters): Application 3: Formulation: Evaluation mode, MR function: Final evaluation, print
Step
1. Turn on the scale and configure
the settings as indicated above
2. Delete old formulation data
3. Tare the scale
4. Place the empty container
on the scale (here: 180.59 g)
5. Tare the scale
6. Weigh in the first component
(here: 42.88 g)
7. Store components in the
formulation memory
Scale is tared automatically
Component are printed out
automatically
Press key(s)
(or follow instructions)
e
c
t
Place load on the scale
t
Place components
in container
soft key
M+
Operating the Scale
Display/Output
6
isoTST
6
isoTST
6
isoTST
6
isoTST
--------------------
16.01.1997
Comp1 +
14:04
42.88 g
127