Setting The Application Parameters - Sartorius Factory Series Operating Instructions Manual

Setting the Application
Parameters
(Application)
Purpose
This menu item enables you to
configure the scale, i.e., adapt the
scale to your individual requirements
by selecting from a list of parameter
options in a menu. You can block
access to this menu by assigning a
password.
Features
The simple weighing function is
available at all times. You can select
one from each of the following
application groups. This means a
number of combinations are possible.
Application 1 (basic settings)
– Toggle weight units
– Counting
– Weighing in percent
– Animal weighing (averaging)
– Recalculation
– Calculation
– Density determination
– Differential weighing
Application 2 (control functions)
– Checkweighing
– Time-controlled functions
Application 3 (data records)
– Totalizing
– Formulation
– Statistics
In addition, you can assign 2 extra
functions to each of the soft keys, in
some cases (depending on the Setup
configuration):
– Second tare memory
– Identification codes
– Manual storage M+ key
– Product data memory
Auto-start application the scale is
switched on
Factory settings:
only application parameters
44
Factory Settings
The factory settings are identified by
the symbol "ο" in the list starting on the
next page.
Preparation
Display available application
parameters:
§ Select the Setup menu: press the
M key
> SETUP is displayed
§ Select parameters: repeatedly
press the q and O soft keys
If you have already assigned a
password:
> The password prompt is displayed:
$ If access is blocked by a password:
enter the password using the
numeric/alphabetic keys
$ If the last character of the password
is a letter: conclude input by
pressing a
§ Confirm your password and have
the application parameters display-
ed: press the l soft key
> The application menu is displayed:
$ To select the next group:
press the q soft key (down arrow)
$ To select the previous item of a
group: press the Q soft key (up
arrow)
$ To select the next sub-item within a
group: press the O soft key (right
arrow)
$ To select the previous group: press
the o soft key (left arrow)
$ To confirm: press the l soft key
Extra Functions
§ Exit the Setup menu: press the oo
soft key
> Restart your application
§ Print parameter settings:
– When the scale functions are
displayed, press p
> Printout (example)
Texts with more than 20 characters
are truncated
SETUP
APPLICATION
--------------------
Application 1 (basi
Application 2 (cont
Application 3 (data
Extra function (F4)
2nd tare memory
Container tare we
Automatic printou
Extra function (F5)
Auto-start app. whe
--------------------
Off
Off
Off
No
Off
Off
Off