Operating Design - Sartorius Factory Series Operating Instructions Manual

Operating Design

The scales in the Factory Series
consist of a weighing cell and
a display and control unit. Besides
an AC adapter, your scale also has
an interface port for connecting
a printer, computer, universal remote
control switch, etc.
The display and control unit and the
weighing cell can be set up
separately.
Where not expressly indicated
otherwise, the uses described
in this manual apply to verified and
verifiable scale versions*
(indicated by the suffix "...CE" in
the model number), as well as the
standard version.
Combining Applications
You can combine the use of various
application programs to meet your
more complicated requirements.
Press the D key to select the desired
application programs.
Keys
You can operate the scale either using
the keys on the terminal or from a
connected PC. This manual
describes operation using the keys on
the terminal.
Labeled Keys
These keys always have the function
indicated by their label, but are not
available at all times. Availability of
their functions depends on the current
operating status of the scale and the
menu settings.
* For the use in legal metrology
in the EU and European
Economic Area
Meaning
a Alphabetic keys
Please see section on "Text
Input"
e On/off/standby key
Turns the scale on and off or
switches it to the standby mode
M Menu settings
Accesses and exits the Setup
D Toggles to the next application
program
FC Models:
TARE
SETUP
ABC 1 2 3
FCA Models:
c Clear Function
Deletes keypad input
Interrupts a calibration and
adjustment routine in progress
Quits application programs
p Print key
Outputs displayed values or
data logs to the interface port
. Enters a decimal point
1 ... 9 0 keys
See the section on
"Numeric Input"
t Tares the scale
Numeric Input
To enter numbers: press 1 ... 9
0 .
To store numbers entered:
press the corresponding function key
directly below the soft key label
To delete an entire numeric input
digit by digit:
press the c key
Text Input
§ To enter numbers: see the section
on "Numeric Input"
Operating Design
4 5 6 7 8
§ To enter letters or characters:
press the a key
> Letters are displayed in the bottom
line for selection
§ To select a different letter:
press the corresponding soft key
to change the letter shown
§ To select the letter/character
shown: press the corresponding
function key below the soft key
label
> The selected letter is shown on
the display
$ Enter the next letter/character, if
desired, as described above
$ To exit the letter input mode
e.g., if the last character entered is
a letter): press the a key
§ To store a word: press the corre-
sponding function key (soft key),
such as ID
§ To delete an input character by
character: press the c key
§ To delete user data: enter . or a
space "m" and save
TARE
CF
D
9 0
3