Sartorius Factory Series Operating Instructions Manual page 38

Setup - Calibration /
Scale - adjustment
functions
Adapt filter
Application filter
Stability range
Taring*
Auto zero
** = not applicable to verified scales used in legal metrology in the European Economic Area
** = verified scales can only be calibrated, not adjusted
38
Cal/isoTST key function
ο Internal calibration/adjustment
Calibration/
ο Calibrate, then manual adjust
adjustment sequence
ο Off
isoCAL function
Start autom.
calibration/adjustment
ο isoCAL
ο Automatic if GLP is selected
Print GLP/GMP
adjustment record
Parameter for
external weight
Minimum vibration (ambient conditions)
ο Normal vibration
Strong vibration
Extreme vibration
ο Final readout
Filling mode
Low filtering
Without filtering
1 / digit
4
1 / digit
2
1 digit
ο 2 digits
4 digits
8 digits*
Without stability
ο After stability
ο On
Off
External calibration/adjustment**; with factory-defined calibration weight
External calibration/adjustment**; user-defined weight
Cal key blocked
reproTEST
Selection mode for cal./adjustment)
Calibrate, then auto adjust
Only adjustment prompt
On; delete application
On; do not delete application
User def. times Time 1: (hh.mm)
Time 2: (hh.mm)
Time 3: (hh.mm)
On request,
from record memory
Weight set ID (W ID): Enter 14 characters max.
Calibration/adjustment-
weight: Enter exact weight