Sartorius Factory Series Operating Instructions Manual page 132

Practical Example
Totalize counted pieces and print out statistics
Settings (changes in the factory settings required for this example):
Setup: App(lication parameters): Application 1: Counting: Average piece weight updating: Manual
Setup: App(lication parameters): Application 3: Statistics: Evaluated values:Calculated
Setup: App(lication parameters): Application 3: Statistics: Evaluation mode, MR function: Final evaluation, display + print
Step
1. Turn on the scale and configure
the settings as indicated above
2. Delete old statistics data, if necessary c
3. Tare the scale
4. Toggle to Application 1: Counting
5. Place the displayed number of parts Place parts to be counted
on the scale (here: 10 pcs)
6. Initialize the Counting application
7. Remove the reference sample
quantity and toggle to Statistics
8. Place a number of parts on the
scale (here: 35 pcs)
132
Press key(s)
(or follow instructions)
e
t
D
on the scale
soft key
Start
Unload the scale
D
Place parts on the scale
Display/Output
6
isoTST
6
isoTST
6
isoTST
nRef
wRef 10.62600 g
6
isoTST
6
isoTST
10 pcs