Selecting The Printout Function - Sartorius Genius Series Operating Instructions Manual

Selecting the Printout Function (

Purpose
This menu item enables you to
configure the printout to meet your
individual requirements by selecting
predefined menu parameters in the
Setup menu. Printouts of weights and
other measured or calculated values and
IDs enable you to document your data.
You can select the particular data you
wish to print. To prevent changes to
your settings, you can block access to
the menu by assigning a password.
Features
The device parameters are combined in
the following groups
(1st menu level):
– Application-defined output
– Automatic output of displayed values
– Output to interface ports
– Line format
– ISO/GLP printout
– Identification # (identifier)
– Factory settings – only printout
Factory Settings
Parameters: The factory settings
are identified by the symbol "ο" in
the list on the next page.
34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Printout
Preparation
Display available printout parameters
§ Select the Setup menu:
press s
> SETUP is displayed:
§ Select "Printout":
use the and soft keys
q O
If no password has been assigned,
anyone can access the printout
parameters in the Setup menu
If a password has already been assigned:
> The password prompt is displayed
$ If access is blocked by a password: enter
the password using the numeric and/or
alphabetic keys
$ If the last character of the password
is a letter: conclude input by pressing
the a key
§ Press
l to confirm the password
> Printout parameters are now displayed:
$ To select the next group:
press the soft key (down arrow)
q
$ To select the previous item of
a group: press the soft key
Q
(up arrow)
$ To select the next sub-item within
a group: press the soft key (right
O
arrow)
$ To select the previous group:
press the soft key (left arrow)
o
$ To confirm: press the
soft key
l
)
Extra Functions
§ Exit the Setup menu:
press the soft key
oo
> Restart your application
§ Print parameter settings:
– When the printout parameters
are displayed, press
> Printout (Example)
--------------------
SETUP
PRINTOUT
--------------------
Application-defined
Stability paramete
With stability
Print on request t
Auto print upon in
Configured printou
Indiv.: Printout
Automatic output of
Stability paramete
Witout stability
Stop auto print
Not possible
Time-dependent aut
1 display update
Output to interface
Serial communicati
Application-defined
Serial printer (PR
Application-defined
Line format
For other apps/GLP (
22 characters)
ISO/GLP/GMP printou
Identification #
Lot (L ID):
ID1:
etc.
p
/r
Off
All values
output
output
Off
ID1