Related Manuals for Sartorius Sartorius PMA 35D-X
Summary of Contents for Sartorius Sartorius PMA 35D-X
- Page 1 98648-008-38 Sartorius PMA 35D-X, PMA 35D-X00C , PMA 35D-X00CV1 Electronic Paint-Mixing Scales Installation and Operating Instructions...
- Page 2 PMA 35D-X, PMA 35D-X000C, PMA 35D-X00CV1 1 Load plate 2 e key (ON/OFF) 3 y Correction key: decrease (only on the PMA 35D-X00C and Important Note to Users PMA35D-X00CV) G Make sure to carefully read and follow 4 = Tare key sections marked with this symbol.
- Page 3 Getting Started Do not miss out on the benefits of our full warranty. Please contact your local Sartorius office or dealer for further Remove the scale, load plate Equipment Supplied: information. If available, and AC adapter from the Scale, load plate, complete the warranty package.
- Page 4 Remove the load plate. Ground the scale in the Connect the scale to AC Use a 13-mm open-end wrench hazardous area/location. power. Install the power cable to loosen the leveling foot (1). Connect an equipotential and grounding cable with Turn the leveling foot (2) until bonding conductor to the adequate protection so that the scale is level.
- Page 5 Weighing with One Decimal Place Place an empty paint can on the load plate (1). Press = (4). The display shows “0.0 g.” Pour in the first component, and read off the weight as soon as the stability symbol appears; in this case, “g.” Pour in additional components until the desired weight of your formula is reached.
- Page 6 Example: Let’s suppose you want to weigh only 250 l of a basic formula for a total amount of 1 l. With the recalculation mode, you do not need to manually recalculate the individual components. The basic formula for 1 liter is: 250 g green paint 250 g red paint 500 g blue paint...
- Page 7 Example: 1. Place an empty paint can 2. Press the = key (4). 3. Pour in the 1st component. on the load plate (1). + 118.0 g 0.0 g + 50.0 g 4. Press the [MEM] key (9). 5. Pour in the 2nd component. 6.
- Page 8 Accessing the Menu Press e (2) to turn off the scale. Press e again to turn the scale back on; briefly press the = key (4) during the automatic self-test. “I “ is now displayed. Set the desired code as follows: Press = (4) until the desired number is displayed.
-
Page 9: Troubleshooting Guide
Troubleshooting Guide Problem Causes Solution No segments appear – No AC power available – Check the AC power supply on the weight display The display shows “L” – The load plate is not in place – Position the load plate The display shows “H”... - Page 10 Specifications Model PMA 35D-X PMA35D-X000C Weight range Readability 0.5/1 0.5/1 Tare range (subtractive) – 35 – 35 Max. overload capacity Max. linearity < 2 < 2 Repeatability < g Sensitivity drift < + 10 ppm at + 10° C to 30° C Integration time, can be selected externally 1.6 to 6.4...
- Page 16 Sartorius AG 37070 Goettingen, Germany Weender Landstrasse 94 - 108, 37075 Goettingen, Germany (+49/551) 308-0, (+49/551) 308-289 Internet: http://www.sartorius.com Copyright by Sartorius AG, Goettingen, Germany. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior written permission of Sartorius AG.
Need help?
Do you have a question about the Sartorius PMA 35D-X and is the answer not in the manual?
Questions and answers