Sartorius Factory Series Operating Instructions Manual page 88

Practical Example P2: Weighing in Percent with Reference Weight Entered Using the Numeric Keys
Settings (changes in the factory settings required for this example):
Setup: App(lication parameters): Application 1: Weighing in percent
FCA Models: Setup: Printout: Application-defined output: Autoprint upon initialization: All values
Step
1. Delete previous setting if necessary
2. Prepare a container
for the parts
3. Tare the scale
4. Enter the reference weight using
the numeric keys (here: 120 g)
5. Store the reference weight
6. Determine the percentage
of an unknown weight
7. Toggle to weight display
88
Key (or instruction)
c
Place the empty container
on the scale
t
1 2 0
soft key
Wxx%
Place sample to be
measured in the container
(in the case: 114.78 g)
soft key
Weigh.
Display/Output
pRef pRef + +
Wxx% Wxx% + + 1821.48 g 120.00 g
100 % 100 %