Sartorius Factory Series Operating Instructions Manual page 53

Printout Parameters (Overview)
ο factory setting
√ user-defined setting
Setup Application-
Print- defined
output
Automatic output
of displayed
value
Output to interface
port
Line format
ISO/GLP/GMP
printout
Identification
Factory settings:
only
printout
* = auto print when load change is >10 d and stability is reached: no printout until residual difference in load value is < 5 d
Stability parameter
ο With stability
ο Off
Print on request, then tare
ο Off
Auto print upon
initialization
(of the application)
Configured printout
ο Off
FlexPrint
ο Without stability
Stability parameter
Stop auto print
ο Not possible
ο 1 display update
Time-dependent
auto print
ο Application-defined output
Serial communication
(PERIPHERALS)
For raw data (16 characters)
ο For other apps/
GLP (22 characters)
ο Off
Only for calibration/adjustment
Always on
Lot ID (L ID):
ID1:
ID2:
ID3:
ID4:
No
Yes
Configuring the Scale: FCA
Without stability
On
All values
Only main values
See own chapter starting on the next page
On
At stability
Automatic after
weight change*
Use print key p
2 display updates
10 display updates
100 display updates
Automatic output of displayed value
Enter 20 characters max
ID1
ID2
ID3
ID4
53