Sartorius Factory Series Operating Instructions Manual page 68

Keys
You can assign different functions to
the c key for deleting input and
applications.
When you delete applications, you
can delete either the data stored for
all applications or just selected data.
CF function in
application
When you delete input, you can
either delete all the data input
in a field, or only the last character
entered.
CF function for
inputs
You can block key functions; you can
choose whether to block all keys
(except e and M) or just the
alphanumeric keys.
Block key functions
68
Extra Functions
Acoustic Signal
An acoustic signal is emitted
when you press a key. When the
key pressed is allowed, the signal
is a single beep-tone; when it is not
allowed, this is signaled by a
double-beep (key does not initiate
a function). In the Setup menu,
you can configure whether
– the acoustic signal should sound
( )
On
– the acoustic signal should not
sound ( )
Off
Power-On Mode
You can configure the scale so that
when a power supply is connected,
– the scale is off
( ), or
Off/on/standby
– the scale switches on automatically
( )
Auto on
You can also configure the scale to
go into the standby mode
( ) when it is
Off/on/standby
turned off.
After you turn on the scale, a self-test
of the functions is run (
TEST
displayed in the text line and the bar
graph is shown)
is