Sartorius Factory Series Operating Instructions Manual page 163

Factory series electronic precision scales
Table of Contents

Advertisement

Interface Description
Purpose
Your Factory scale comes equipped
with an interface port for connection
to a computer or other peripheral
device.
You can use an on-line computer
to change, start and/or monitor the
functions of the scale and the
application programs. The interface
port also has four data output
port lines for the over/under check-
weighing program.
! Warning When Using Prewired
RS-232 Connecting Cables!
RS-232 cables purchased from other
manufacturers often have incorrect
pin assignments for use with Sartorius
scales. Be sure to check the pin
assignment against the chart on
page 168 before connecting the
cable, and disconnect any lines
marked "Internally Connected".
Failure to do so may damage or even
completely ruin your scale and/or
peripheral device.
Available Features
Type of interface:
Operating mode:
Standard:
Transmission rates:
Parity:
Character format:
Handshake:
Operating mode:
Network address*:
Data output format of the scale:
* xBPI operating mode: 9,600 baud, 8 bits, odd parity, 1 stop bit
Network address is only valid in the XBPI mode
Factory Settings:
Transmission rate:
Parity:
Stop bits:
Handshake:
Operating mode:
Network address:
Print manually/automatically:
Stop automatic printing:
Automatic printout, time-dependent:
Tare after ind. printout:
Application initialization values:
Line format:
Preparation
§ See page 168 for the pin assignment chart
Operating the Scale
Serial interface
Full duplex
RS-232
150; 300; 600; 1,200; 2,400;
4,800; 9,600; 19,200 baud
Space, odd, even
1 start bit, 7-bit ASCII, parity,
1 or 2 stop bits
2-wire interface: via software
(XON/XOFF); 4-wire interface:
via hardware handshake lines
(CTS/DTR)
SBI, xBPI*
0, 1, 2, ..., 30, 31
16 or 22 characters
1,200 baud
[5-1-4]
Odd
[5-2-3]
1 stop bit
[5-3-1]
Hardware
[5-4-3]
1 character after CTS
SBI
[5-5-1]
0
[5-6-1]
Manual after stability
[6-1-2]
Not possible
[6-2-2]
After 1 display update
[6-3-1]
Off
[6-4-1]
Off
For other applications/GLP
(22 characters)
163

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Factory fcFactory fca

Table of Contents