Sartorius Factory Series Operating Instructions Manual page 119

Preparation
Turn on the scale: press e
> The Sartorius logo is displayed
Select the "Time-controlled functions" application in the Setup menu:
press M
FC Models:
§ Select the Application menu: Press the
§ Select
Application 2
FCA Models:
Select the
Application parameters
then the O soft key
Select
Application 2 (control functions)
press the q soft key, then the O soft key
Select
Time-controlled functions
Confirm
Time-controlled functions
Time-controlled Function after
functions time interval
Automatic function
restart
Storage mode
Print then tare
o = factory setting
see also the "Application Parameters (Overview)" in the chapter entitled
"Configuring the Scale"
Save settings and exit the Setup menu: press the oo soft key
Print Net Values without Printout of Time
Select the Setup menu:
FC Models:
Setup: App: Basic settings: Printout configuration: Auto print upon initialization:
Off
FCA Models:
Setup: Printout: Application-defined output: Auto print upon initialization: Off
soft key
App
: Press the q soft key and then the O soft key
: press the q key 2 x,
: press the Q or q soft key
: press the O soft key
Beep
Lock in readout
o Automatic printout of values
Store value in applicat. 3 memory
o On
Off
o Without stability
After stability
After higher stability
On
o Off
Operating the Scale
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric
input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
Press the
:
> See "Calibration/Adjustment" for
further instructions
Toggling to Another Application
Press D
> See the section on the
corresponding application
program for further instructions
Setup (Setting Parameters)
Press M
> See "Configuring the Scale" for
further instructions
Turning Off the Scale
Press e
> The scale shuts off
> The display goes blank, then
OFF or Standby is displayed with
backlighting
soft key
isoTST
119