Sartorius Factory Series Operating Instructions Manual page 140

Practical Example: FC Models
Include company address and sample lot number on the printout. Each ID line begins with the name.
Print this ID for each net value.
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Extra function (F4): Identification codes
Setup: Input: ID1: Company
Setup: Input: ID2: Location
Setup: Input: ID3: Street
Setup: Input: ID4: Lot
Step
1. If necessary, turn on the scale
2. Select "Extra Function (F4)"
in the Setup menu
3. Select "Identification codes"
4. Confirm "Identification codes"
and exit this menu item
5. Select ID1
(Printout: Identifier)
6. Enter name for ID 1
(in this case: COMPANY)
and confirm
140
Press key(s)
(or follow instructions)
e
M
q soft key2 x,
then O soft key once
q soft key 3 x,
then O soft key once
q or Q soft key;
repeatedly, if necessary
O soft key;
then o soft key 3 times
q or O soft key
q soft key 5 x, then
O soft key, then q soft key
a ... see also page 63
a, soft key
l
Display/Output