Practical Example 1:
Enter "Workstation 234" as the scale ID; display and print other user data
Step
1. Select Setup: Input
Display workstation ID
(in this example: no ID assigned)
2. Before entering letters:
Then enter first letter of
the workstation ID
3. Select the letters group
4. Select the letter "W"
5. Enter the next letters of the
workstation ID
6. Select the letter "A"
7. Repeat steps 5 and 6 to enter
the required letters
8. Enter the numbers 234
If the last character entered
is a letter:
Conclude input of letters
9. Store workstation ID
Key (or instruction)
Press M, then
the Input soft key
Press a
Press the STUVWX soft key
Press the W soft key
Press the ABCDEF soft key
Press the A soft key
Soft key ...
2 3 4
a
Press the l soft key
Configuring the Scale: FC
Display/Output
9