Sartorius Factory Series Operating Instructions Manual page 72

Preparation: FCA Models
Set the parameters for calibration and adjustment; e.g., with manual calibration/adjustment, isoCAL off
Step
1. Switch on the scale,
if not already on
2. Select the Setup menu
3. Select "Balance/scale functions"
4. Select "Calibration/adjustment"
5. Select CAL/isoTST key function
6. Select desired function and
confirm (e.g., "Ext. cal./adj.;
factory-def. wt.")
7. Exit CAL/isoTST key function
8. Select "Cal./adjustment sequence"
72
Press key(s)
(or follow instructions)
e
M
soft key
O
soft key
O
soft key
O
soft key, repeatedly,
Q
if necessary soft key
l
soft key
o
soft key
q
Display/Output
Sartorius logo and self-test
o = last setting selected