Printout - Sartorius SECURA1102-1NUS User Manual

System Settings (Setup Menu)

Printout

Printout
Manual print
Automatic print
34
User Manual Secura ® , Quintix
6.2.6 Printout
You can configure the settings for printing and data output here .
Some of the settings depend on the USB port configuration (see page 36) .
Printout
Under :
Define the settings for outputting logs and reports to a connected lab printer .
t
Manual
– : The data is printed out when
Automatic
–
– Without stability
The printout does not have any unit symbols in this case .
– With stability
Print after weight change
–
exceeded at stability and the weight has previously been reduced to less than
half of the threshold .
Under Manual print
This option can be selected when Manual print has been set in the
Define the settings for the Manual print .
t
ISO/GLP printout
–
ISO/GLP-compliant printout is required .
Tare after print
–
printing .
– Manual print format
printing, such as date and value .
Value without ID
Device/protocol: PC
Value or Date, value or Value (N, T, G#) or Date, value (N, T, G#)
Only for Secura
Under Automatic print
This option can be selected when Automatic print has been set in the
Define the settings for the automatic print .
t
Autom. print interval
–
Interval time
–
Choose from the last three interval times or enter the desired interval time in
seconds via t and confirm with l (factory setting: 5 seconds) .
– Select the Standard option to use a model-specific output rate for weight
determination .
Autom. print format
–
printing, such as date and value .
Value without ID
Device/protocol: PC
Valueor Date, value: only for Secura
® , Practum ®
a
: The data is printed out automatically .
: No stability is required for a printout .
: The data can only be printed out when stability is reached .
: Data is printed once, after a threshold has been
:
(Secura ® and Quintix ®
: Activate this option to automatically tare the balance after
: Select the information to be printed during manual
: only if being transmitted to a PC (menu items: USB port:
– xxx)
® and Quintix ®
:
:
:
: Select the information to be printed during automatic
: only if being transmitted to a PC (menu items: USB port:
– xxx)
®
is selected in the application .
Printout menu .
only): Activate this option when an
Printout
and Quintix
®
menu .