Additional Functions (In The Scale Menu) - Sartorius Factory Series Operating Instructions Manual

Additional Functions
(in the Scale Menu): FC Models
Password
You can block access to parameter
settings in the Setup menu and to
the ID code input function, as well as
to the exact calibration weight, by
assigning a password.
Enter the password under Setup:
Input. See "Configuring the Scale"
for a detailed description.
Protecting Menu Parameters
In the Setup menu, you can define
whether menu parameters are
– accessible for changes
(
Change parameters,
)
[8-1-1]
– can be read only (
Read
parameters, [8-1-2]
Acoustic Signal
An acoustic signal is emitted when
you press a key. When the key
pressed is allowed, the signal is
a single beep-tone; when it is not
allowed, this is signaled by a double-
beep (key does not initiate a function).
In the Setup menu, you can configure
whether
– the acoustic signal should sound
( , )
On [8-2-1]
– the acoustic signal should not
sound ( ,
Off [8-2-2]
Universal Switch for Remote Control
You can connect an external universal
switch to the interface port of your
scale (e.g., a foot switch) for remote
control of the functions listed below.
In the Setup menu, you
can configure which function is to
be controlled via remote switch:
– 1 ( ,
Print key [8-4-1]
– 2 ( ,
Tare key [8-4-2]
– 3 ( ,
Cal key [8-4-3]
– 4 (
F1 function key
[8-4-4]
– 5 (
CF key
– 6 (
F2 function key
[8-4-6]
"PC Keyboard" Functions
The alphanumeric key codes
implemented are for a German
keyboard layout only ("Z" in the first
row instead of "Y", for example).
Some of alphanumeric keys are used
with the [Shift] key:
a–z, A–Z, 0 –9, space
„,.\+#<>!"$@%&/();=:_?*"
Function keys:
PC keyboard
F1
F2
F3
F4
)
F5
F6
F7
F8
F9
F10
F11
F12
Return
Backspace
Up cursor
Left cursor
Down cursor
Right cursor
POS1 (HOME) Soft key 6
ESC
)
PRINT
The "Num Lock" and "Caps Lock"
keys are not supported. There is no
country-specific option for switching
these keys to a different function.
)
)
)
Operating the Scale: FC
, Display Backlighting
)
You can have the display backlighted
, )
[8-4-5] for improved readability of displayed
values. In the Setup menu, you can
,
configure whether the
)
– display backlighting is on
– display backlighting shuts off
Power-On Mode
You can configure the scale so that
when a power supply is connected,
– the scale is off
Scale
t key
M key
– the scale switches on automatically
Soft key 6
Soft key 5
Soft key 4
You can also set the configurations so
Soft key 3
that when the scale is turned off after
Soft key 2
use, it is
Soft key 1
Display – off (
Escape
p/[PRINT] key
t key
– in the standby mode (
Soft key 1
Escape
Soft key 3
Soft key 4
After you turn on the scale, a self-test
Soft key 2
of the functions is run (
Soft key 1 displayed in the text line; the bar
graph is shown)
Escape
After the self-test has been completed,
p/[PRINT] key
the weighing range of the scale is
displayed (line for metrological data
shows different increments)
Automatic Shutoff
When parameter
selected in the Setup menu, you can
configure whether
– the scale shuts off automatically
– automatic shutoff is deactivated
( , )
On [8-5-1]
automatically after 4 minutes
without activity
(
Auto off after
4 minutes, [8-5-3]
(
Off/on/standby [8-6-1]
or )
Off/on [8-6-2]
( ,
Auto on
)
[8-6-4]
, ) (not
Off/on [8-6-2]
possible with scales that have a
weighing capacity ≥16 kg)
Off/on/
, )
standby [8-6-1]
is
TEST
is
[8-6-2]
after 4 minutes without use
( ,
After 4 minutes
)
[8-7-1]
( ,
Off [8-7-2]
)
65