Sartorius Factory Series Operating Instructions Manual page 106

LOTS: 792 Smpl.avail.
1 1 Sample
122 1 Sample
AB05 20 Samples T,N,R1
CH0001 10 Samples T,N
CH01234 2 Samples T,N,R1
DeleteCreate
oo Q
SMPL: avail.792 Lot: CH0001
Sample 1: T,N,R(1)
Sample 2: T,N,R(1)
Sample 3: T,N
Sample 4: T,N
Sample 5: T,N
Delete
oo o Q
VALUES: Lot: CH0001 Smpl:2
Date,time: 16.11.1998
Name: ID
Tare: T1 + 324.72 g
Net initial wt: N1 + 414.45 g
BackwghId res: R (1)+ 393.55 g
Result
oo o Q
RESULT: Lot: CH0001
Residue: R +
R +
dResidue:
Loss: D -
Loss: D -
Ratio1: DR +
Values
oo o Q
STATISTICS: Lot:CH6789
Statistics on: R (1)
Statistics on: R (2)
Statistics on: R (*)
Messw.
oo o Q
STATISTICS: Lot:CH6789
Date,time: 04.02.1999
Statistics on: R (1)
No.of values: n
Mean value: Mean +
Std. deviation: s
Messw.
oo o Q
106
List Function for Differential Weighing
The list function has 4 display pages: one each for lots, samples, values and
results.
Display Page for Lots
The display page for lots shows all of the lots that have already been created,
T
T,N as well as the number of samples in each lot and the processing status of the
selected sample (tare, initial and backweighing). On this display page you
Sample
q
can create, rename, delete and print lots. You can also define a factor for
calculation of loss; for instance, to have weight per unit area calculated (such
as grams per square meter). You can also enter a lot ID alphanumerically to
access a lot directly.
Display Page for Samples
This display page shows the samples contained in a selected lot, as well as the
CX87
processing status of the samples (tare, initial and backweighing) and the
CX88
sample IDs. You can also enter a sample ID alphanumerically to access
Values
q a sample directly.
Display Page for Values
This display page shows the date and time of sampling, as well as the sample
15:11:17
ID and the values measured, for a selected sample.
CX88
q
Display Page for Results
This display page shows the calculated values for a selected sample. These
Smpl:2
20.74 g
include backweighed residue, loss, loss calculated using a factor, and the ratio
80.48 %
5.03 g
values. The o symbol indicates the value that is selected for display immediately
19.52 %
24.25 %
q l following a backweighing procedure. To change this setting, use the q and Q
soft keys to move the highlight bar to the desired value, and press l to confirm.
Display Page for Statistics
This page shows the characteristic data for a lot (date; time; statistics on, for
5 Spls
example, the backweighed residue; number of samples) as well as the
3 Spls
8 Spls
calculated values (mean value, standard deviation).
q l
To select a set of statistics from a lot with different numbers of backweighing
procedures:
14:31:30
OResidueo
2
Press the l soft key to display the selected set of statistics:
93.28 %
0.01 %
q l