Practical Example
When weighing in formulation components, the second component is over-poured.
Settings (changes in the factory settings required for this example):
Setup: App(lication parameters): Application 1: Recalculation
Step
Key (or instruction)
———————————————————————————————————————————————---——
1. Delete previously stored values,
if necessary
2. Place container for filling
components on the scale
3. Tare
4. Add the first component
5. Store component
6. Add the second component
7. Start recalculation, because
10.73 g were poured rather
than 10.60 g
8. Either press the minus
key to correct the value ...
Display/Output
c
Place empty container
on the scale
t
Weigh the first component
into the container
Press the
Comp.1
Weigh the second
component into the container
soft key
Recalc
soft key repeatedly
Minus
Operating the Scale
RECALC.: Store
RECALC.: Store
RECALC.: Store
Comp1 +
25.08 g
RECALC.: Store
Recalc
RECALC.: Store
Recalc
RECALC.: Correcting
RECALC.: Correcting
s
2
s
2
s
2
s
2
95