System Settings (Setup Menu)
Printout
Printout
Manual print
Automatic print
®
34
User Manual Secura
, Quintix
6.2.6
Printout
You can configure the settings for printing and data output here.
Some of the settings depend on the USB port configuration (see page 36).
Printout
Under
:
t
Define the settings for outputting logs and reports to a connected lab printer.
Manual
–
: The data is printed out when
Automatic
–
Without stability
–
The printout does not have any unit symbols in this case.
With stability
–
Print after weight change
–
exceeded at stability and the weight has previously been reduced to less than
half of the threshold.
Manual print
Under
This option can be selected when Manual print has been set in the
t
Define the settings for the Manual print.
ISO/GLP printout
–
ISO/GLP-compliant printout is required.
Tare after print
–
printing.
Manual print format
–
printing, such as date and value.
Value without ID
Device/protocol: PC
Value or Date, value or Value (N, T, G#) or Date, value (N, T, G#)
Only for Secura
Automatic print
Under
This option can be selected when Automatic print has been set in the
t
Define the settings for the automatic print.
Autom. print interval
–
Interval time
–
Choose from the last three interval times or enter the desired interval time in
seconds via t and confirm with l (factory setting: 5 seconds).
–
Select the Standard option to use a model-specific output rate for weight
determination.
Autom. print format
–
printing, such as date and value.
Value without ID
Device/protocol: PC
Valueor Date, value: only for Secura
®
®
, Practum
a
: The data is printed out automatically.
: No stability is required for a printout.
: The data can only be printed out when stability is reached.
: Data is printed once, after a threshold has been
:
®
®
(Secura
and Quintix
: Activate this option to automatically tare the balance after
: Select the information to be printed during manual
: only if being transmitted to a PC (menu items: USB port:
– xxx)
®
and Quintix
®
:
:
:
: Select the information to be printed during automatic
: only if being transmitted to a PC (menu items: USB port:
– xxx)
®
is selected in the application.
Printout
menu.
only): Activate this option when an
Printout
®
and Quintix
menu.