Adding A New Wireless Filter - Motorola RFS Series Reference Manual

6. Modify the existing
Ending MAC field to use only the
switch managed network.
7. Use the drop-down menu to select
This rule applies to MUs within the specified Starting and Ending MAC Address range. For example, if
the adoption rule is to Allow, access is granted for all MUs within the specified range.
8. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel to close the dialog without committing updates to the running configuration.

6.4.2 Adding a new Wireless Filter

Use the Add screen to create a new index and define a new address permission range. Once created, an
allow or deny designation can be applied to the new filter ACL.
To create a new filter ACL:
1. Select Security
2. Click the Add button at the bottom of the screen to launch a new dialogue used for creating an ACL.
Define an Index (numerical identifier) for the ACL and the starting and ending MAC address range for
devices allowed/denied access to the switch managed network.
3. Enter an Index numerical value (1 -1000) in the
The MU-ACL Index is a numerical identifier used to associate a particular ACL to a range of MAC
addresses (or a single MAC address) either allowed or denied access to the switch managed network.
Enter a new Index to define a new MAC Address range and allow/deny ACL Index designation.
4. Enter the a hex value for the
This is the beginning MAC address either allowed or denied access to the switch managed network.
5. Enter the a hex value for the
Ending MAC field to use only the
switch managed network.
6. Use the drop-down menu to select
This rule applies to MUs within the specified Starting and Ending MAC Address range. For example, if
the adoption rule is to Allow, access is granted for all MUs within the specified range.
Ending MAC for the target Index. Enter the same Starting MAC address within the
Starting MAC
Allow or Deny.
field for the state of the requests made from applet. This field displays error
> Wireless Filters from the main menu tree.
Starting MAC
Ending MAC
Starting MAC
Allow or Deny.
address as either allowed or denied access to the
MU-ACL Index field.
address.
address. Enter the same Starting MAC address within the
address as either allowed or denied access to the
6-17
Switch Security