Redundancy Group - Motorola RFS Series Reference Manual

2-78 Motorola RF Switch CLI Reference Guide

2.1.28 redundancy group


Common to all modes
This command displays the switch's IP address, number of active neighbors, group license,
installed license, cluster AP adoption count, switch adoption count, hold time, discovery
time, heartbeat interval, cluster id and switch mode.
In a cluster, this command displays the redundancy runtime and configuration of the
"self-switch". Use
parameters.
Syntax
show redundancy group [config|runtime]
Parameters
redundancy group
[config | runtime]
Example
RFSwitch(config)#show redundancy group
Redundancy Group Configuration Detail
Redundancy Feature
Redundancy group ID
Redundancy Mode
Redundancy Interface IP
Number of configured peer(s)
Heartbeat-period
Hold-period
Discovery-period
Handle STP
Switch Installed License
Switch running image version
Auto-revert-period
Auto-revert Feature
DHCP-Server Redundancy
Redundancy Group Runtime Information
to view only configuration information and/or
config
Displays redundancy runtime and configuration details.
• config – Displays configured redundancy group
information
• runtime – Displays runtime redundancy group
information
: Primary
: 5 Seconds
: 15 Seconds
: 30 Seconds
: Disabled
: Disabled
: 1
: 0.0.0.0
: 0
: 48
: 3.1.0.0-008D
: 5 mins
: Disabled
: Disabled
runtime