Specifying The Radius Authentication/Authorization Servers; Configuring The Radius Accounting Servers And Relevant Parameters - H3C S7500E Series Operation Manual

Operation Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches

1.4.2 Specifying the RADIUS Authentication/Authorization Servers

Follow these steps to specify the RADIUS authentication/authorization servers:
Enter system view
Create a RADIUS scheme
and enter RADIUS scheme
view
Specify the primary RADIUS
authentication/authorization
server
Specify the secondary
RADIUS
authentication/authorization
server
Note:
It is recommended to specify only the primary RADIUS authentication/authorization
server if backup is not required.
In practice, you may specify two RADIUS servers as the primary and secondary
authentication/authorization servers respectively. At a moment, a server can be the
primary authentication/authorization server for a scheme and the secondary
authentication/authorization servers for another scheme.
The IP addresses of the primary and secondary authentication/authorization
servers for a scheme cannot be the same. Otherwise, the configuration fails.

1.4.3 Configuring the RADIUS Accounting Servers and Relevant Parameters

Follow these steps to specify the RADIUS accounting servers and perform related
configurations:
Enter system view
Create a RADIUS scheme
and enter RADIUS
scheme view
To do...
To do...
system-view
radius scheme
radius-scheme-name
Chapter 1 AAA/RADIUS/HWTACACS
Use the command...
system-view
radius scheme
radius-scheme-name
primary
authentication
ip-address
[ port-number ]
secondary
authentication
ip-address
[ port-number ]
Use the command...
1-24
Configuration
Remarks
—
Required
Not defined by default
Required
Use either approach
By default, neither the
primary nor the secondary
authentication/authorizatio
n server is specified.
Remarks
—
Required
Not defined by default