H3C S7500E Series Operation Manual page 1019

Operation Manual – QoS
H3C S7500E Series Ethernet Switches
I. Configuration procedure
Follow these steps to define a traffic behavior:
Enter system view
Create a traffic behavior
and enter the
corresponding traffic
behavior view
Configure accounting
action
Configure TP action
Configure traffic filtering
behavior
Configure traffic mirroring
action
Configure nested VLAN
tag action
Configure traffic redirect
action
Remark the customer
network VLAN ID for
packets
Remark DSCP value for
packets
Remark 802.1p priority for
packets
Remark drop precedence
for packets
To do...
system-view
traffic behavior
behavior-name
accounting
car cir
committed-information-rate
[ cbs committed-burst-size
[ ebs excess-burst-size ] ] [ pir
peak-information-rate ] [ green
action ] [ red action ] [ yellow
action ]
filter { deny | permit }
mirror-to { cpu | interface
interface-type
interface-number }
nest top-most vlan-id vlan-id
redirect { cpu | interface
interface-type interface-number
| link-aggregation group
agg-id | next-hop { ipv4-add
[ ipv4-add ] | ipv6-add
[ interface-type
interface-number ] [ ipv6-add
[ interface-type
interface-number ] ] } }
remark customer-vlan-id
vlan-id-value
remark dscp dscp-value
remark dot1p 8021p
remark drop-precedence
drop-precedence-value
Chapter 3 QoS Policy Configuration
Use the command...
3-5
Remarks
—
Required
behavior-name:
Behavior name.
This operation leads
you to traffic
behavior view
Required
You can configure
the traffic behavior
as required.