System Maintaining And Debugging - H3C S7500E Series Operation Manual

Operation Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Debugging
information
Protocol
debugging
switch
Screen
output
switch
Figure 2-1 The relationship between the protocol and screen debugging switch
Note:
Displaying debugging information on the terminal is the most commonly used way to
output debugging information. You can also output debugging information to other
directions. For details, refer to Information Center Configuration.

2.2 System Maintaining and Debugging

2.2.1 System Maintaining
To do...
Check whether a
specified IP address
can be reached
1 2
ON
ON
OFF
OFF
Use the command...
ping [ ip ] [ -a source-ip | -c
count | -f | -h ttl | -i
interface-type
interface-number | -m interval
| -n | -p pad | -q | -r | -s
packet-size | -t timeout | -tos
tos | -v ] * remote-system
ping ipv6 [ -a source-ipv6 | -c
count | -m interval | -s
packet-size | -t timeout ] *
remote-system [ -i
interface-type
interface-number ]
Chapter 2 System Maintaining and Debugging
Debugging
3 information
Protocol
debugging
switch
Screen
output
switch
2-3
1 2 3
ON
OFF
ON
Remarks
Optional
Used in IPv4 network
Available in any view
Optional
Used in IPv6 network
Available in any view