Configuring Snmp Logging; Introduction To Snmp Logging; Enabling Snmp Logging - H3C S7500E Series Operation Manual

Operation Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Caution:
The validity of a USM user depends on the engine ID of the SNMP agent. If the engine
ID used for USM user creation is not identical to the current engine ID, the USM user is
invalid.

1.3 Configuring SNMP Logging

1.3.1 Introduction to SNMP Logging

SNMP logs the GET and SET operations that NMS performs to SNMP Agent. When the
GET operation is performed, Agent logs the IP address of NMS, node name of the GET
operation and OID of the node. When the SET operation is performed, Agent logs the
IP address of NMS, node name of the SET operation, OID of the node, the value set
and the error code and index returned with the SET operation. These logs will be
transferred to system information and sent to the information center to be checked and
tracked.
SNMP logs GET request, SET request and SET response, but does not log GET
response.

1.3.2 Enabling SNMP Logging

Enter system view
Enable SNMP logging
To do...
system-view
snmp-agent log { all |
get-operation | set-operation }
Use the command...
1-6
Chapter 1 SNMP Configuration
Remarks
—
Required
Disabled by default.