H3C S7500E Series Operation Manual page 659

Operation Manual – Multicast
H3C S7500E Series Ethernet Switches
<SwitchA> system-view
[SwitchA] igmp-snooping
[SwitchA-igmp-snooping] quit
# Create VLAN 100, assign Ethernet 2/0/1 through Ethernet 2/0/4 to this VLAN, and
enable IGMP Snooping in the VLAN.
[SwitchA] vlan 100
[SwitchA-vlan100] port ethernet 2/0/1 to ethernet 2/0/4
[SwitchA-vlan100] igmp-snooping enable
[SwitchA-vlan100] quit
# Enable simulated host joining on Ethernet 2/0/3 and Ethernet 2/0/4 respectively.
[SwitchA] interface ethernet 2/0/3
[SwitchA-Ethernet2/0/3] igmp-snooping host-join 224.1.1.1 vlan 100
[SwitchA-Ethernet2/0/3] quit
[SwitchA] interface ethernet 2/0/4
[SwitchA-Ethernet2/0/4] igmp-snooping host-join 224.1.1.1 vlan 100
[SwitchA-Ethernet2/0/4] quit
4) Verify the configuration
# View the detailed information about IGMP Snooping multicast groups in VLAN 100 on
Switch A.
[SwitchA] display igmp-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
MAC group(s):
MAC group address:0100-5e01-0101
Eth2/0/1
(0.0.0.0, 224.1.1.1):
Attribute: Host Port
Host port(s):total 2 port.
Eth2/0/3
Eth2/0/4
Chapter 2 IGMP Snooping Configuration
(D) ( 00:01:30 )
(D) ( 00:03:23 )
(D) ( 00:03:23 )
2-25