When Using Publickey Authentication - H3C S7500E Series Operation Manual

Operation Manual – SSH
H3C S7500E Series Ethernet Switches
Figure 1-3 SSH client configuration interface
From the window shown in
be prompted to enter the username client001 and password aabbcc. .

1.5.2 When Using Publickey Authentication

I. Network requirements
The host (SSH client) and the switch (SSH server) are directly connected through
the Ethernet interfaces.
The host runs SSH client software to securely log on to the switch for
configuration.
Publickey authentication is used, the algorithm is RSA.
II. Network diagram
SSH client
192.168.1.56/24
Host
Figure 1-4 SSH server configuration (using publickey authentication)
Figure 1-3, click Open. If the connection is normal, you will
SSH server
Vlan-int1
192.168.1.40/24
Switch
1-17
Chapter 1 SSH Configuration