Configuring A Basic Ipv6 Acl; Chapter 3 Ipv6 Acl Configuration - H3C S7500E Series Operation Manual

Operation Manual – ACL
H3C S7500E Series Ethernet Switches

Chapter 3 IPv6 ACL Configuration

When configuring IPv6 ACLs, go to these sections for information you are interested in:
Creating a Time Range

Configuring a Basic IPv6 ACL

Configuring an Advanced IPv6 ACL
Copying an IPv6 ACL
Displaying and Maintaining IPv6 ACLs
IPv6 ACL Configuration Example
3.1 Creating a Time Range
Refer to section
3.2 Configuring a Basic IPv6 ACL
Basic IPv6 ACLs filter packets based on source IPv6 address. They are numbered in
the range 2000 to 2999.
3.2.1 Configuration Prerequisites
If you want to reference a time range to a rule, define it with the time-range command
first.
3.2.2 Configuration Procedure
Follow these steps to configure a basic IPv6 ACL:
To do...
Enter system view
Create and enter
basic IPv6 ACL view
Creating a Time Range
Use the command...
system-view
acl ipv6 number
acl6-number [ name
acl6-name ] [ match-order
{ auto | config } ]
3-1
Chapter 3 IPv6 ACL Configuration
Remarks
––
Required
The default match order is
config.
If you specify a name for an
IPv6 ACL when creating the
ACL, you can use the acl ipv6
name acl6-name command to
enter the view of the ACL later.