Configuring 802.1X For A Port - H3C S7500E Series Operation Manual

Operation Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches

1.2.3 Configuring 802.1x for a Port

I. Enabling 802.1x for a port
Follow these steps to enable 802.1x for a port:
Enter system view
Enable
802.1x for
one or
more ports
II. Configuring 802.1x parameters for a port
Follow these steps to configure 802.1x parameters for a port:
Enter system view
Enter Ethernet interface
view
Set the port access
control mode for the port
Set the port access
control method for the port
Set the maximum number
of users for the port
Enable online user
handshake
Enable detection and
control of users logging in
through proxies for the
port
Enable multicast trigger
Note that:
To do...
system-view
In system
dot1x interface interface-list
view
interface interface-type
In Ethernet
interface-number
interface
view
dot1x
To do...
system-view
interface interface-type
interface-number
dot1x port-control
{ authorized-force | auto
| unauthorized-force }
dot1x port-method
{ macbased |
portbased }
dot1x max-user
user-number
dot1x handshake
dot1x supp-proxy-check
{ logoff | trap }
dot1x multicast-trigger
Use the command...
Use the command...
1-15
Chapter 1 802.1x Configuration
Remarks
—
Required
Use either
approach.
Disabled by default
Remarks
—
—
Optional
auto by default
Optional
macbased by default
Optional
By default, the maximum
number of concurrent
users accessing a port is
1024.
Optional
Enabled by default
Optional
Disabled by default
Optional
Enabled by default