Setting To Output System Information To The Console - H3C S7500E Series Operation Manual

Operation Manual – Information Center
H3C S7500E Series Ethernet Switches
Setting to Output System Information to the Trap Buffer
Setting to Output System Information to the Log Buffer
Setting to Output System Information to the SNMP NMS
Setting to Save System Information to a Log File
Configuring Synchronous Information Output

1.2.2 Setting to Output System Information to the Console

I. Setting to output system information to the console
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to the console
Configure the output rules
of system information
Configure the format of
the time stamp
Task
To do...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center console
channel
{ channel-number |
channel-name }
info-center source
{ module-name | default }
channel
{ channel-number |
channel-name } [ debug
{ level severity | state
state } * | log { level
severity | state state } * |
trap { level severity |
state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Chapter 1 Information Center Configuration
Use the command...
1-7
Remarks
Optional
Optional
Optional
Optional
Optional
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-2 for
default channel names.
Optional
System information is
output to the console by
default, with channel 0 as
the default channel.
Optional
Refer to Table 1-4 for the
default output rules of
system information.
Optional
The time stamp for log,
trap and debugging
information is date by
default.