H3C S7500E Series Operation Manual page 1200

Operation Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Table 1-7 Common command line errors
% Unrecognized command found at '^'
position.
% Incomplete command found at '^'
position.
% Ambiguous command found at '^'
position.
Too many parameters
% Wrong parameter found at '^' position.
Error information
The command was not found.
The keyword was not found.
Parameter type error
The parameter value is beyond the
allowed range.
Incomplete command
Ambiguous command,
Too many parameters
Wrong parameter
1-17
Chapter 1 Basic Configurations
Cause