Operation Manual – Multicast
H3C S7500E Series Ethernet Switches
Bootstrap timeout time
An ACL rule defining a legal C-RP address range and the range of multicast
groups to be served
C-RP-Adv interval
C-RP timeout time
The IP address of a static RP
An ACL rule for register message filtering
Register suppression timeout time
Probe time
ACL rule and sequencing rule for RPT-to-SPT switchover
5.3.3 Enabling PIM-SM
With PIM-SM enabled, a router sends hello messages periodically to discover PIM
neighbors and processes messages from PIM neighbors. When deploying a PIM-SM
domain, you are recommended to enable PIM-SM on all interfaces of non-border
routers (border routers are PIM-enabled routers located on the boundary of BSR
admin-scope regions).
Follow these steps to enable PIM-SM:
Enter system view
Enable IP multicast
routing
Enter interface view
Enable PIM-SM
Caution:
All the interfaces of the same router must work in the same PIM mode.
To do...
system-view
multicast
routing-enable
interface interface-type
interface-number
pim sm
Use the command...
5-20
Chapter 5 PIM Configuration
Remarks
—
Required
Disable by default
—
Required
Disabled by default