Msdp Configuration Examples; Inter-As Multicast Configuration Leveraging Bgp Routes - H3C S7500E Series Operation Manual

Operation Manual – Multicast
H3C S7500E Series Ethernet Switches
View the detailed
information about the
status of MSDP peers
View the (S, G) entry
information in the MSDP
cache
View the number of SA
messages in the MSDP
cache
Reset the TCP connection
with an MSDP peer
Clear (S, G) entries in the
MSDP cache
Clear all statistics
information of an MSDP
peer

6.7 MSDP Configuration Examples

6.7.1 Inter-AS Multicast Configuration Leveraging BGP Routes

I. Network requirements
There are two ASs in the network, AS 100 and AS 200 respectively. OSPF is
running within each AS, and BGP is running between the two ASs.
PIM-SM 1 belongs to AS 100, while PIM-SM 2 and PIM-SM 3 belong to AS 200.
Each PIM-SM domain has zero or one multicast source and receiver. OSPF runs
within each domain to provide unicast routes.
It is required that the respective Loopback 0 of Switch B, Switch C and Switch E be
configured as the C-BSR and C-RP of the respective PIM-SM domains.
It is required that an MSDP peering relationship be set up between Switch B and
Switch C through EBGP, and between Switch C and Switch E through IBGP.
To do...
display msdp peer-status
[ peer-address ]
display msdp sa-cache
[ group-address |
source-address | as-number ] *
display msdp sa-count
[ as-number ]
reset msdp peer
[ peer-address ]
reset msdp sa-cache
[ group-address ]
reset msdp statistics
[ peer-address ]
Use the command...
6-17
Chapter 6 MSDP Configuration
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Available in user view