Displaying And Maintaining Mac Authentication; Mac Authentication Configuration Examples; Local Mac Authentication Configuration Example - H3C S7500E Series Operation Manual

Operation Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Configure the username
and password for MAC
authentication
Note:
You can configure MAC authentication for various ports in advance. The
configuration, however, takes effect only after the global MAC authentication is
enabled.
You can neither add a MAC authentication enabled port into an aggregation group,
nor enable MAC authentication on a port added into an aggregation group.

3.4 Displaying and Maintaining MAC Authentication

Display the global MAC
authentication information
or the MAC authentication
information about
specified ports
Clear the MAC
authentication statistics

3.5 MAC Authentication Configuration Examples

3.5.1 Local MAC Authentication Configuration Example

I. Network requirements
As illustrated in
GigabitEthernet 2/0/1.
Local MAC authentication is required on every port to control user access to the
Internet.
All users belong to domain aabbcc.net.
To do...
mac-authentication
user-name-format
{ fixed [ account name ]
[ password { cipher |
simple } password ] |
mac-address
[ with-hyphen |
without-hyphen ] }
To do...
display mac-authentication
[ interface interface-list ]
reset mac-authentication
statistics [ interface
interface-list ]
Figure 3-1, a supplicant is connected to the device through port
Chapter 3 MAC Authentication Configuration
Use the command...
Use the command...
3-5
Remarks
Optional
By default, the user's
source MAC address
serves as the username
and password, and the
MAC address does not
contain hyphen "-".
Remarks
Available in any view
Available in user view