H3C S7500E Series Operation Manual page 605

Operation Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
FF02::1
MTU is 1500 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
[SwitchB] display ipv6 interface Tunnel1/0/3
Tunnel1/0/3 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::C0A8:3201
Global unicast address(es):
3001::2, subnet is 3001::/64
Joined group address(es):
FF02::1:FFA8:3201
FF02::1:FF00:2
FF02::2
FF02::1
MTU is 1500 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
# Ping the IPv6 address of the peer tunnel interface from Switch A.
[SwitchA]ping ipv6 3001::2
PING 3001::2 : 56
Reply from 3001::2
bytes=56 Sequence=1 hop limit=64
Reply from 3001::2
bytes=56 Sequence=2 hop limit=64
Reply from 3001::2
bytes=56 Sequence=3 hop limit=64
Reply from 3001::2
bytes=56 Sequence=4 hop limit=64
Reply from 3001::2
bytes=56 Sequence=5 hop limit=64
--- 3001::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/15/31 ms
data bytes, press CTRL_C to break
time = 31 ms
time = 16 ms
time = 1 ms
time = 15 ms
time = 15 ms
3-9
Chapter 3 Tunneling Configuration