H3C S7500E Series Operation Manual page 514

Operation Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
NextHop
*Destination: 2001:2::/64
Type
NextHop
*Destination: 2001:3::/64
Type
NextHop
3) Configure Area 2 as a stub area
# Configure Switch D
[SwitchD] ospfv3
[SwitchD-ospfv3-1] area 2
[SwitchD-ospfv3-1-area-0.0.0.2] stub
# Configure Switch C, and specify the cost of the default route sent to the stub area as
10.
[SwitchC] ospfv3
[SwitchC-ospfv3-1] area 2
[SwitchC-ospfv3-1-area-0.0.0.2] stub
[SwitchC-ospfv3-1-area-0.0.0.2] default-cost 10
# Display OSPFv3 routing table information on Switch D. You can find a default route is
added, whose cost is the cost of the directly connected route plus the configured cost.
[SwitchD] display ospfv3 routing
E1 - Type 1 external route,
E2 - Type 2 external route,
------------------------------------------------------------------------
*Destination: ::/0
Type
NextHop
*Destination: 2001::/64
Type
NextHop
*Destination: 2001:1::/64
Type
NextHop
*Destination: 2001:2::/64
: FE80::F40D:0:93D0:1
: I
: directly-connected
: IA
: FE80::F40D:0:93D0:1
IA - Inter area route,
OSPFv3 Router with ID (4.4.4.4) (Process 1)
: IA
: FE80::F40D:0:93D0:1
: IA
: FE80::F40D:0:93D0:1
: IA
: FE80::F40D:0:93D0:1
3-17
Chapter 3 IPv6 OSPFv3 Configuration
* - Seleted route
Interface: Vlan400
Cost : 1
Interface: Vlan400
Cost : 4
Interface: Vlan400
I - Intra area route
Cost : 11
Interface: Vlan400
Cost : 2
Interface: Vlan400
Cost : 3
Interface: Vlan400