H3C S7500E Series Operation Manual page 1077

Operation Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
The following log information is displayed on the terminal when NMS performs the
GET operation to Agent.
%Jan 1 02:49:40:566 2006 Sysname SNMP/6/GET:
seqNO = <10> srcIP = <1.1.1.2> op = <get> node = <sysName(1.3.6.1.2.1.1.5.0)>
value=<>
The following log information is displayed on the terminal when NMS performs the
SET operation to Agent.
%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:
seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus
=<noError> node = <sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>
Table 1-1 Descriptions on the output field of SNMP log
Jan 1 02:49:40:566 2006
seqNO
srcIP
op
node
erroIndex
errorstatus
value
Note:
The system information of the information center can be output to the terminal or to the
log buffer. In this example, SNMP log is output to the terminal. To set the SNMP log to
be output to other directions, refer to Information Center Configuration.
Field
The time when SNMP log is generated
Sequence number of the SNMP log ()
IP address of NMS
SNMP operation type (GET or SET)
Node name of the SNMP operations and OID of the
instance
Error index, with 0 meaning no error
Error status, with noError meaning no error
Value set when the SET operation is performed (This
field is , meaning the value obtained with the GET
operation is not logged.)
When the value is a string of characters and the
string contains characters not in the range of ASCII 0
to 127 or invisible characters, the string is displayed
in hexadecimal. For example, value = <81-43>[hex]
Description
1-12
Chapter 1 SNMP Configuration