Configuring An Ssh User - H3C S7500E Series Operation Manual

Operation Manual – SSH
H3C S7500E Series Ethernet Switches
Return from public key
code view to public key
view
Return from public key
view to system view
II. Importing a client public key from a public key file
Follow these steps to import a public key from a public key file:
Enter system view
Import the public key from
a public key file

1.2.6 Configuring an SSH User

This configuration allows you to create an SSH user and specify the service type and
authentication method.
Follow these steps to configure an SSH user:
Enter system view
Create an
SSH user,
and specify
the service
type and
authenticati
on method
To do...
public-key-code end
peer-public-key end
To do...
system-view
public-key peer keyname import
sshkey filename
To do...
system-view
ssh user username service-type
stelnet authentication-type
For stelnet
{ password | { any |
users
password-publickey | publickey }
assign publickey keyname }
ssh user username service-type { all |
For all sftp } authentication-type { password |
users or { any | password-publickey |
sftp users publickey } assign publickey keyname
work-directory directory-name }
Use the command...
Use the command...
Use the command...
1-9
Chapter 1 SSH Configuration
Remarks
—
When you exit public key
code view, the system
automatically saves the
public key.
—
Remarks
—
Required
Remarks
—
Required
Use either
command.