Anycast Rp Configuration - H3C S7500E Series Operation Manual

Operation Manual – Multicast
H3C S7500E Series Ethernet Switches
[SwitchE] display msdp brief
MSDP Peer Brief Information
Configured
1
Peer's Address
192.168.3.1

6.7.3 Anycast RP Configuration

I. Network requirements
The PIM-SM domain has multiple multicast sources and receivers. OSPF runs
within the domain to provide unicast routes.
It is required to configure the anycast RP application so that the receiver-side DRs
and the source-side DRs can initiate a Join message to their respective RPs that
are the topologically nearest to them.
On Switch B and Switch D, configure the interface Loopback 10 as a C-BSR, and
Loopback 20 as a C-RP.
The router ID of Switch B is 1.1.1.1, while the router ID of Switch D is 2.2.2.2. Set
up an MSDP peering relationship between Switch B and Switch D.
Up Listen
1 0
State Up/Down time
Up 00:16:40
6-27
Chapter 6 MSDP Configuration
Connect Shutdown
0 0
AS SA Count
? 13
Down
0
Reset Count
0