H3C S7500E Series Operation Manual page 560

Operation Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Match BGP routes having
extended attributes
contained in the extended
community list(s)
Match routes having
specified outbound
interface(s)
Match routes having the
specified route type
Match the routes having
the specified tag value
Note:
The if-match clauses of a route-policy are in logic AND relationship, namely, routing
information has to satisfy all if-match clauses before being executed with apply
clauses.
You can specify no or multiple if-match clauses for a routing policy. If no if-match
clause is specified, and the routing policy is in permit mode, all routing information
can pass the node; if in deny mode, no routing information can pass.
6.3.4 Defining apply Clauses for the Routing Policy
Follow these steps to define apply clauses for a route-policy:
Enter system view
Create a routing policy
and enter its view
To do...
if-match extcommunity
ext-comm-list-number&<1
-16>
if-match interface
{ interface-type
interface-number }&<1-16
>
if-match route-type
{ internal |
external-type1 |
external-type2 |
external-type1or2 |
is-is-level-1 |
is-is-level-2 |
nssa-external-type1 |
nssa-external-type2 |
nssa-external-type1or2 }
*
if-match tag value
To do...
system-view
route-policy
route-policy-name
{ permit | deny } node
node-number
Chapter 6 Routing Policy Configuration
Use the command...
Use the command...
6-7
Remarks
Optional
Not configured by default
Optional
Not configured by default
Optional
Not configured by default
Optional
Not configured by default
Remarks
—
Required
Not created by default