A
L
CCESS
IMITATION
HTTP Port — Specifies the HTTP port for IP connectivity. (Default: 80;
◆
Range 1024-65535)
HTTPS Server — Enables/disables management access from a HTTPS
◆
server. (Default: enabled)
HTTPS Port — Specifies the HTTPS port for secure IP connectivity.
◆
(Default: 443; Range 1024-65535)
◆
SNMP Access — Enables/disables management access from SNMP
interfaces. (Default: enabled)
The Access Limitation page limits management access to the access point
from specified IP addresses or wireless clients.
Figure 29: Access Limitation
The following items are displayed on the Access Limitation page:
IP M
C
ANAGEMENT
ONTROL
Any IP — Indicates that any IP address is allowed management
◆
access.
Single IP — Specifies a single IP address that is allowed management
◆
access.
Multiple IP — Specifies an address range as defined by the entered IP
◆
address and subnet mask. For example, IP address 192.168.1.6 and
subnet mask 255.255.255.0, defines all IP addresses from 192.168.1.1
to 192.168.1.254.
– 67 –
| Management Settings
C
6
HAPTER
Access Limitation