Ip Address; Figure 20: Ip Configuration - SMC Networks E21011 User Manual

IP A
DDRESS
You must set the country code to the country of operation.
C :
AUTION
Setting the country code restricts operation of the access point to the radio
channels and transmit power levels permitted for wireless networks in the
specified country.
Configuring the access point with an IP address expands your ability to
manage the access point. A number of access point features depend on IP
addressing to operate.
You can use the web browser interface to access IP addressing only if the
access point already has an IP address that is reachable through your
network.
By default, the access point will be not be automatically configured with IP
settings from a Dynamic Host Configuration Protocol (DHCP) server. The
default IP address is 192.168.2.1, subnet mask 255.255.255.0 and a
default gateway of 192.168.2.254.

Figure 20: IP Configuration

The following items are displayed on this page:
◆ DHCP Status — Enables/disables DHCP on the access point.
IP Address — Specifies an IP address for management of the access
◆
point. Valid IP addresses consist of four decimal numbers, 0 to 255,
separated by periods. (Default: 192.168.2.1.)
Subnet Mask — Indicates the local subnet mask. Select the desired
◆
mask from the drop down menu. (Default: 255.255.255.0)
– 53 –
| System Settings
C 5
HAPTER

IP Address