Table of Contents
Advertisement
◆
◆
◆
◆
Describes additional basic VAP settings when functioning in WDS-STA
WDS-STA M
ODE
mode.
Figure 48: WDS-STA Mode
The following items are displayed in the VAP Basic Settings when WDS-AP
mode is selected:
◆
◆
Describes the wireless security settings for each VAP, including association
W
S
IRELESS
ECURITY
mode, encryption, and authentication.
S
ETTINGS
N
limited to WPA-PSK and WPA2-PSK only.
Authentication Timeout Interval — The time within which the client
should finish authentication before authentication times out.
(Range: 5-60 minutes; Default: 60 minutes)
Default VLAN ID — The VLAN ID assigned to wireless clients
associated to the VAP interface that are not assigned to a specific VLAN
by RADIUS server configuration. (Default: 1)
DHCP Relay Server — The IP address of the DHCP relay server.
SSID — The service set identifier for the VAP.
WDS-AP (Parent) SSID — The SSID of the VAP on the connecting
access point that is set to WDS-AP mode.
WDS-AP (Parent) MAC — The MAC address of the VAP on the
connecting access point that is set to WDS-AP mode.
For VAPs set to WDS-AP or WDS-STA mode, the security options are
:
OTE
– 95 –
| Wireless Settings
C
8
HAPTER
Virtual Access Points (VAPs)
Advertisement
Table of Contents
