Connect Power; Verify Ap Operation - SMC Networks WAP5110-L Quick Start Manual

Quick Start Guide

4. Connect Power

5. Verify AP Operation

If you do not power the unit using PoE, connect the AC power adapter to the AP
and to an AC power source.
1
1
Connect the power adapter to the power socket.
2
Connect the power adapter to a nearby AC power source.
Verify basic AP operation by checking the system LEDs.
The Power LED should be on green and the Network LED on or flashing amber.
1
Network Link/Activity
2
Power/Diagnostic
1 2
– 4 –
2